Duke EPO Instructions d'exploitation télécharger pdf (Page 10)

10 of 24

DUKE PROOFER OVEN

RESTAURANT

EQUIPMENT

MANUAL

REVISED:

January 18, 2006

DUKE PROOFER OVEN

DUKE MANUFACTURING CO.

TOLL FREE 1-800-735-DUKE(3853)

314

231

1130

Door Adjustments & Gasket Maintenance

Door Gasket Leak Adjustments

The doors should be checked for leaks every three months. The adjustment can be

made by following the instructions below. If the door gasket is damaged, or

compressed permanently, it should be replaced. Call Duke Manufacturing Co. at 800-

735-3853 to order a new gasket before making adjustments.

1. With the door closed, remove the

hinge covers with a screwdriver and

loosen the six screws that hold the

hinges to the door.

2. Adjust the door position by moving

the door frame in or out to seal any

gaps between the gasket and the

oven front. Be careful not to

compress the gasket too much, it

will cause the door to bind up on the

hinge side.

3. When the door is positioned, tighten

the hinge screws.

4. Loosen the two screws that hold the

door handle in place.

5. Adjust the door position by moving

the door frame in or out to seal any

gaps between the gasket and oven

front.

6. When the door is positioned, tighten

the door handle screws.

7. To check the adjustment, close the

door with a dollar bill between the

gasket and front of the oven. You

should feel resistance when you try

to pull the dollar bill out with the

door closed. Do this check in several

places and readjust the door if

necessary.

Door Handle Screws

Door Hinge Screws

Move Door to adjust gap

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Duke EPO Instructions d'exploitation Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Duke EPO